Forcing Cone Cutters

Forcing cone cutters are used for cutting the forcing cone in revolvers, or more commonly for re-cutting the forcing cone where it is worn or eroded to give a revolver a new lease of life.

Our forcing cone cutters have ten cutting flutes, in contrast to other manufacturers which might have four or six flutes. The advantage of having a lot of cutting flutes is that it tends not to ride up when cutting the lands and so leaves a much more uniform forcing cone.

Forcing cone cutters are currently made to order. The forcing cone angle is typically 5 degrees per side, but you can specify what angle you want.

The thread for the T handle is M5

All counterbore reamers are £182 (€234, $256)